Expansion Free Masonry Epoxy Anchors No Shrinkage Environmental
Friendly
Technical Data
Anchoring Adhesive used with thread rod
| Thread Rod Dia |
C30 Concrete | M10 | M12 | M16 | M20 | M24 |
| Drilling Dia.(mm) | | 12 | 14 | 18 | 24 | 28 |
| Depth (mm) | | 90 | 110 | 145 | 180 | 220 |
| Damage Pulling force KN | Grade 5.8 Steel | 29 | 42.2 | 78.5 | 122.5 | 254.5 |
| Grade 8.8 Steel / A4 SS | 36.8 | 52.9 | 94.1 | 147.0 | 211.7 |
| Damage Cutting force KN | Grade 5.8 Steel | 17.4 | 25.3 | 47.1 | 73.5 | 105.9 |
| Grade 8.8 Steel | `27.8 | 40.5 | 75.3 | 117.6 | 169.4 |
| A4 SS | 24.4 | 35.4 | 65.9 | 102.9 | 105.9 |
| Designed Pulling force KN | | 12.0 | 17.02 | 30.6 | 52.4 | 75.2 |
| Designed Cutting Force KN | Grade 5.8 Steel | 12.2 | 17.6 | 32.9 | 51.5 | 74.1 |
| Grade 8.8 Steel | 18.6 | 27.0 | 50.2 | 78.4 | 113.0 |
| A4 SS | 13.0 | 19.0 | 35.3 | 55.2 | 56.9 |
| Holes for each | | 54 | 25 | 8 | 5 | 3 |
Anchoring Loading Capacity of rebar to C30 concrete (designed value
KN)
| Rebar d(mm) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 |
| Hole D(mm) | 14 | 16 | 18 | 22 | 25 | 28 | 30 | 32 | 36 | 38 | 40 |
| Bar planting depth (mm) | 100 | 19.8 | | | | | | | | | | |
| 120 | 23.8 | 27.6 | | | | | | | | | |
| 140 | 27.7 | 32.2 | 36.3 | | | | | | | | |
| 160 | 31.7 | 36.8 | 41.5 | 45.8 | | | | | | | |
| 180 | | 41.4 | 46.6 | 51.6 | 55 | | | | | | |
| 200 | | 46.0 | 51.8 | 57.3 | 61.1 | 62.8 | | | | | |
| 220 | | | 57.0 | 63.1 | 67.2 | 69.1 | 71.5 | | | | |
| 240 | | | 62.2 | 68.9 | 73.3 | 75.4 | 78 | 79.2 | | | |
| 260 | | | | 74.6 | 79.3 | 81.7 | 84.5 | 85.8 | 96.1 | | |
| 280 | | | | 80.4 | 85.4 | 88.0 | 91.0 | 92.4 | 102.9 | 107.4 | |
| 300 | | | | | 91.5 | 94.2 | 97.5 | 99 | 109.8 | 114.6 | 115.8 |
| 320 | | | | | 97.6 | 100.5 | 103.9 | 105.6 | 116.6 | 121.8 | 123 |
| 340 | | | | | 103.7 | 106.8 | 110.4 | 112.2 | 123.5 | 128.9 | 130 |
| 360 | | | | | | 113.0 | 117.0 | 118.8 | 130.4 | 136.1 | 137.5 |
| 380 | | | | | | 119.3 | 123.5 | 125.3 | 137.2 | 143.3 | 144.8 |
| 400 | | | | | | 125.6 | 130 | 131.9 | 144.1 | 150.4 | 152 |
| 420 | | | | | | | 136.5 | 138.5 | 150.9 | 157.6 | 159.2 |
| 440 | | | | | | | 143 | 145.1 | 157.8 | 164.7 | 166.5 |
| 480 | | | | | | | 149.5 | 151.7 | 164.7 | 171.9 | 173.7 |
| 500 | | | | | | | 156 | 1583 | 171.5 | 179.1 | 181 |
| 550 | | | | | | | | 164.9 | 188.7 | 197 | 199.1 |
| 600 | | | | | | | | 181.4 | 205.8 | 214.8 | 217.1 |
| 650 | | | | | | | | 197.9 | 223 | 232.7 | 235.2 |
| 700 | | | | | | | | | 240.1 | 250.6 | 253.2 |
| 750 | | | | | | | | | 257.3 | 268.5 | 271.5 |
| 800 | | | | | | | | | | 286.4 | 289.6 |
| 850 | | | | | | | | | | | 307.7 |
| anchoring length (mm) | 147 | 149 | 178 | 210 | 250 | 300 | 351 | 446 | 538 | 592 | 666 |
| steel yield (mm) | 23.6 | 33.9 | 46.2 | 60.3 | 76.3 | 94.2 | 114 | 147.2 | 184.6 | 212.1 | 241.2
|
Key Features
Design flexibility permitted for sustained load performance at
elevated temperature Job site versatility can be specified for dry
and damp conditions when in-service temperatures range from -40°F
(-40°C) to 150°F (65°C)
Recognized per AC308 to be used for rebar development and splice
length design provisions of ACI 318
Easy hole-cleaning, no power-brushing required
1:1 two-component, high-solids, epoxy-based anchoring adhesive
formula
When properly mixed, will be a uniform teal color
Suitable for use under static and seismic loading conditions in
cracked and uncracked concrete and masonry
Our main product series:
-- Chemical Anchor series
Pure Epoxy Adhesive 360ml (5:1) 390ml(3:1) 585ml (3:1)
-- Steel bonding reinforcement system
XQ-JGN structural epoxy adhesive
XQ-GZ Grouting epoxy adhesive
XQ-FB edge sealing adhesive
-- Concrete repair system
XQ-GF crack grouting adhesive
XQ-FF crack sealing adhesive
-- Carbon fiber reinforcement system,
XQ-XW carbon fiber epoxy adhesive
XQ-XB concrete surface leveling epoxy adhesive
XQ-CFC carbon fiber fabric 12K unidirectional 200gsm-600gsm
