UAE Dubai Standard high quality Carbon Fiber CFRP Wrap for tower
retrofitting
Weight: 200gsm
Density: 1.8g/cm³
Packing: 100 meters/roll
Width: 100mm, 200mm, 300mm, 500mm or to be customized.
Storage Condition:Store dry at 40°-95° F(4° -35°)
Shelf Life: 50 years
Color:Black
Carbon Fiber Type: 0° (unidirectional)
UAE Dubai Standard high quality Carbon Fiber CFRP Wrap for tower retrofitting
Carbon Fiber Reinforced Polymers for Structural Strengthening.
These fabrics are applied onto the surface of existing structural
members in buildings, bridges and other structures. The result is
an externally bonded CFRP (carbon fiber reinforced polymer)
reinforcement system engineered to increase the structural
performance
CFRP strengthening of existing structures can involve complex
evaluation, design, and detailing processes, requiring a good
understanding of the existing structural conditions along with the
materials used to repair the structure prior to FRP installation.
The suitability of FRP for a strengthening project can be
determined by understanding what FRP is and the advantages it
offers, but more importantly, its limitations.
The primary benefit of CFRP systems versus traditional retrofit and
repair methods is that significant flexural, lateral, axial or
shear strength gains can be achieved with an easy-to-apply
composite that does not add significant weight or mass to the
structure of building, highway, bridge, tunnel.
Advantages
Used for shear, confinement, seismic or flexural strengthening
Versatile, can be wrapped around complex geometries
High Strength
Light Weight
Non-corrosive
Alkali Resistant
Low aesthetic impact
Testing project | Standard |
High Strength Grade 1 |
Tensile strength | ≥3400 MPa |
Tensile modulus of elasticity | ≥2.3×105 MPa |
Elongation | ≥1.6 % |
Bending Strength | ≥700 MPa |
Layer cutting strength | ≥45 MPa |
Cohesive pulling strength with base materials | To concrete and brick materials, ≥2.5 MPa |
Thickness | 0.167mm |
High strength to weight ratio
Excellent resistance to creep and fatigue
Extremely durable
Low aesthetic impact
Used for shear, confinement, seismic or flexural strengthening
Versatile, can be wrapped around complex geometries
High Strength
Preparation works
Surface must be clean and sound. It may be dry or damp, but free of
standing water and frost. Remove dust, laitance, grease, curing
compounds, impregnations, waxes, foreign particles, disintegrated
materials and other bond inhibiting materials from the surface.
Existing uneven surfaces must be filled with an appropriate repair
mortar. The adhesive strength of the concrete must be verified
after surface preparation by random pull-off testing (ASTM D 4541)
at the discretion of the engineer. Minimum tensile strength
required is 200 psi (1.4 MPa) with concrete substrate failure
(typical).
