High Tensile Strength CFRP Carbon Fiber For Beams Strengthening
With CE Approved
CFRP carbon fiber wrap for bridge, beam, columns
300GSM High Tensile Strength CFRP Carbon Fiber For Beams
Strengthening With CE Approved
Carbon fibre has very high tensile strength and is also very
lightweight. When bonded to the exterior of a concrete column,
beam, or slab, it can add significant strength without adding
weight that would increase the load on foundations and other
structural members.
Carbon fibre strengthening can be a cost effective, clean and
un-intrusive solution to a common structural problem. It isn’t
suitable for every strengthening project and you should always get
advice from a specialist contractor about the best method to use.
The most common CFRP systems for concrete strengthening
applications are carbon fiber based (CFRP). Carbon has superior
mechanical properties and higher tensile strength, stiffness, and
durability compared with glass fiber based systems. The use of
prefabricated CFRP bars and plates is typically limited to straight
or slightly curved surfaces; for example, the top side or underside
of slabs and beams. Prefabricated FRP elements are typically stiff
and cannot be bent on site to wrap around columns or beams.
Features:
- Adds strength without adding dead load
- Withstands sustained and cyclic load conditions
- Extremely resistant to wide range of environmental conditions
- Easy to conceal
Product performance
Weight: 300g/sqm
Thickness: 0.167mm
Density: 1.8g/cm³
Packing: 100 meters/roll
Width:100mm, 200mm, 300mm, 500mm or to be customized.
Laminate Fiber Typical Properties |
| Standrad Value of Tensile Strength | 3800MPa |
| Tensile Elastic Modulus | 2.3 x 105 MPa |
| Elongation | 1.6% |
| With Concrete | Concrete Damaged: ≥2.5MPa |
| Densiy | 1.8g/cc(0.065lbs.in3) |
| Norminal Fiber Thickness | XQ-C200 carbon fiber fabric | 0.111mm(0.0044in.) |
| XQ-C230 carbon fiber fabric | 0.128mm(0.0050in.) |
| XQ-C300 carbon fiber fabric | 0.167mm(0.0065in.) |
| XQ-C450 carbon fiber fabric | 0.251mm(0.0097in.) |
| XQ-C530 carbon fiber fabric | 0.295mm(0.0114in.) |
| XQ-C600 carbon fiber fabric | 0.333mm(0.0130in.) |
Storage Condition:Store dry at 40°-95° F(4° -35°)
Shelf Life: 50 years
Color:Black
Carbon Fiber Type: 0° (unidirectional)
Attention
1, carbon fabric cloth is conductive, please leave far away from
electrical equipment and power supply, or take reliable protection
2, carbon cloth bent should be avoided in the process
3, the surface should be clean and dry;
4, temperature theoretically should be 5-40 ℃
5, Processing in rain and outdoor is prohibited
6, If relative humidity is greater than 85% or condensation on the
concrete surface, Processing is not allowed;
7, Matched resin shall be stored sealed and away from fire and
direct sunlight.
8, The place of the formulation and use of resins should maintain
good ventilation;
9, on-site workers should take appropriate protection measures.
